HP OneLam Combo A3
HP OneLam Combo A3
Compared to the HP OneLam 400 A3, the HP OneLam Combo A3 scores with an integrated cutter, which makes it even easier to cut your documents in straight, curled or perforated format. Through use of the angle presets and centimetre grid, your laminated documents can easily be cut to the desired size. Like the other laminators in the HP OneLam range, this handy backloader is suitable for both hot and cold lamination. With a film thickness of 75/80 to 125 microns, you can protect your pictures, timetables or important documents from business cards up to A3 format from dirt and moisture.
Available in stores now.
Highlights
Warm-up time
Heats up in 2-4 minutes and ready to use for 80 microns.
Film thickness
Applicable from 75/80 to 125 microns.
Format
Suitable for everything from business cards to DIN A3 documents.
Accessories
Integrated cutter, corner scraper and foil set.
Key facts
An intuitive function button on the HP OneLam Combo A3 is used to set the required temperature. After selecting the film thickness, this modern backloader is ready for use in 2-4 minutes.
The integrated roller cutter, the corner scraper, and the 15-piece starter set, consisting of three A4, four A5, four A6 and four business card foils, all ensure immediate laminating fun. The corner scraper can be stored in a practical compartment under the device so that you always have the accessories at hand.
The all-rounder laminates at a speed of 400 millimetres per minute, which corresponds to just over 60 seconds for an A3 document.
Have you accidentally inserted the film with the laminating document at an angle and a paper jam has occurred? No problem, because by pressing the roller release lever, the film is released and can be carefully pulled out on the input side.
If you forget to switch off the HP OneLam Combo A3 at the main switch, the reliable helper automatically switches to standby mode after 30 minutes.
Technical data
Download
HP OneLam Combo A3
The device
- Area of application: private households / hobby requirements
- Laminating formats: from business cards to DIN A3 format
- Warm-up time: 2 - 4 minutes for 80 microns
- Film thickness: 75/80 up to 125 microns or 0.5 mm thickness
- Application: Hot and cold lamination
- Laminating speed: 400 mm per minute
- Temperature: 120 - 150 degrees celsius
- Heating system: 2 rollers are heated from the inside
- Input width: 330 mm
- Colour: white
The accessories
- Integrated cutter for straight, corrugated or perforated cuts
- Corner scraper
- 15-piece starter set (3 x DIN A4, 4 x DIN A5, 4 x DIN A6, 4 x business cards)
The functions
- Function Button: On/off, 75/80 microns, 125 microns, cold
- Temperature controlled: each film thickness has its own temperature
- Automatic standby mode: after 30 minutes
- ABS function: roller release lever
The operating conditions
- Voltage: 220 - 240 V
- Frequency: 50 / 60 Hz
- Power: 400 W / 1.74 A
- Motor type: AC
The logistics
- Item number: 3162
- EAN: 4030152031627
- Device dimensions: 460 mm x 158 mm x 115 mm (width x depth x height)
- Device weight: 1.65 kg
This might also interest you
HP OneLam 270 A4
![Heated up and ready for use in less than 4 minutes]( "Warm-up phase")
![Can be used from 80 micron to 125 micron ]( "Foil thickness")
![Suitable for documents from visiting card to A4 sizes]( "Size")
![Includes five A4 foil pouches in 80 micron]( "Accessories")
Warm-up phase: < 4 minutes, Speed: 270 mm per minute, Foil thickness: 80 – 125 micron
HP OneLam 400 A4
![Heats up in 2-4 minutes and ready to use for 80 microns.]( "Warm-up time")
![Applicable from 75/80 to 125 microns.]( "Film thickness")
![Suitable for everything from business cards to DIN A4 documents.]( "Format")
![Includes cutting ruler,</span><span> corner scraper and foil set.]( "Accessories")
Warm-up time: 2 - 4 minutes, speed: 400 mm per minute, film thickness: 75/80 - 125 micron
HP OneLam 400 A3
![Heats up in 2-4 minutes and ready to use for 80 microns.]( "Warm-up time")
![Applicable from 75/80 to 125 microns.]( "Film thickness")
![Suitable for everything from business cards to DIN A3 documents.]( "Format")
![Cutting ruler, corner scraper and foil set included. ]( "Accessories")
Warm-up time: 2 - 4 minutes, speed: 400 mm per minute, film thickness: 75/80 - 125 micron
Still looking for suitable laminating foils?
Everyday laminating pouches, starter set, 80 mic.
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![DIN A4, DIN A5, DIN A6, business cards.]( "Format")
![25 films of each size in a folding carton with a total of 100 foils.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: starter set, film thickness: 80 micron, quantity: 100 pieces
Everyday laminating pouches, A3, 80 mic.
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For DIN A3 documents with the dimensions 303 mm x 426 mm.]( "Format")
![Package unit of 25 foils per pack.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: DIN A3, film thickness: 80 micron, quantity: 25 pieces
Everyday laminating pouches, A4, 80 mic. small pack
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For DIN A4 documents with the dimensions 216 mm x 303 mm.]( "Format")
![Package unit of 25 foils per pack.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: DIN A4, film thickness: 80 micron, quantity: 25 pieces
Everyday laminating pouches, A4, 80 mic. big pack
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For DIN A4 documents with the dimensions 216 mm x 303 mm.]( "Format")
![Package unit of 100 foils in a folding box.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: DIN A4, film thickness: 80 micron, quantity: 100 pieces
Everyday laminating pouches, A5, 80 mic.
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For DIN A5 documents with the dimensions 154 mm x 216 mm.]( "Format")
![Package unit of 25 foils per pack.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: DIN A5, film thickness: 80 micron, quantity: 25 pieces
Everyday laminating pouches, A6, 80 mic.
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For DIN A6 documents with the dimensions 110 mm x 160 mm.]( "Format")
![Package unit of 25 foils.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: DIN A6, film thickness: 80 micron, quantity: 25 pieces
Everyday laminating pouches, business cards, 80 mic.
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For business cards with the dimensions 60 mm x 95 mm.]( "Format")
![Package unit of 100 foils in a folding carton.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: business cards, film thickness: 80 micron, quantity: 100 pieces
Premium laminating pouches, A4, 125 mic. pre punched
![Laminating films with a thickness of 125 microns.]( "Film thickness")
![For DIN A4 documents with the dimensions 228 mm x 303 mm.]( "Format")
![Package unit of 25 foils per pack.]( "Content")
![Glossy and transparent for hot lamination with ring binder perforation.]( "Features")
Format: DIN A4 pre punched, film thickness: 125 micron, quantity: 25 pieces