HP OneLam 400 A3
HP OneLam 400 A3
The HP OneLam 400 A3 has a fold-out lid, which not only serves as a practical insertion aid, but also makes the device a particularly space-saving companion. The practical backloader is suitable for hot and cold lamination and can be used for laminating films with a thickness of 75/80 to 125 microns. Whether you want to protect recipes, photos or children's drawings from wear and tear, the laminator seals your documents regardless of format, from business cards up to DIN A3.
Available in stores now.
Highlights
Warm-up time
Heats up in 2-4 minutes and ready to use for 80 microns.
Film thickness
Applicable from 75/80 to 125 microns.
Format
Suitable for everything from business cards to DIN A3 documents.
Accessories
Cutting ruler, corner scraper and foil set included.
Key facts
The modern HP OneLam 400 A3 has an intuitive function button that sets the required temperature based on the selected film thickness and this reliable assistant heats up in 2-4 minutes.
A cutting ruler, corner scraper and a 15-piece starter set consisting of three A4, four A5, four A6 and four business card sheets is supplied so that you can begin your laminating project right away. The cutting ruler and the corner scraper can be stored in a handy compartment underneath the device so that you always have the accessories at hand.
With a speed of 400 millimetres per minute, the HP OneLam 400 A3 therefore laminates an A3 document in about 60 seconds. If you have inserted the film into the laminator at an angle, this can lead to a film jam. Thanks to the roller release lever, the film can be carefully released and pulled out on the input side and the foil jam rectified.
If you forget to switch off the device via the main switch, the heating process is stopped after 30 minutes and the laminator switches to standby mode.
Technical data
Download
HP OneLam 400 A3
The device
- Range of application: private households / hobby requirements, office workstations
- Laminating formats: from business cards to DIN A3 format
- Warm-up time: 2 - 4 minutes for 80 microns
- Film thickness: 75/80 up to 125 microns or 0.5 mm thickness
- Application: Hot and cold lamination
- Laminating speed: 400 mm per minute
- Backloader: fold-out lid as insertion aid on the rear side
- Temperature: 120 - 150 degrees celsius
- Heating system: 2 rollers are heated from the inside
- Input width: 330 mm
- Colour: white
The accessories
- Cutting ruler
- Corner scraper
- 15-piece starter set (3 x DIN A4, 4 x DIN A5, 4 x DIN A6, 4 x business cards)
The functions
- Function Button: On/off, 75/80 microns, 125 microns, cold
- Temperature controlled: each film thickness has its own temperature
- Automatic standby mode: after 30 minutes
- ABS function: roller release lever
The operating conditions
- Voltage: 220 - 240 V
- Frequency: 50 / 60 Hz
- Power: 400 W / 1.74 A
- Motor type: AC
The logistics
- Item number: 3161
- EAN: 4030152031610
- Device dimensions: 460 mm x 140 mm x 86 mm (width x depth x height)
- Device weight: 1.77 kg
Data sheet HP OneLam 400 A3.pdf
Manual OneLam 400 A3_400 A4.pdf
Quick guide OneLam 400 A3_400 A4.pdf
Declaration of Conformity OneLam 400 A3_400 A4_Combo A3.pdf
Declaration of Conformity OneLam 400 A3_400 A4_Combo A3 turkish.pdf
UK Declaration of Conformity HP OneLam.pdf
This might also interest you
HP OneLam 400 A4
![Heats up in 2-4 minutes and ready to use for 80 microns.]( "Warm-up time")
![Applicable from 75/80 to 125 microns.]( "Film thickness")
![Suitable for everything from business cards to DIN A4 documents.]( "Format")
![Includes cutting ruler,</span><span> corner scraper and foil set.]( "Accessories")
Warm-up time: 2 - 4 minutes, speed: 400 mm per minute, film thickness: 75/80 - 125 micron
HP OneLam Combo A3
![Heats up in 2-4 minutes and ready to use for 80 microns.]( "Warm-up time")
![Applicable from 75/80 to 125 microns.]( "Film thickness")
![Suitable for everything from business cards to DIN A3 documents.]( "Format")
![Integrated cutter, </span><span>corner scraper and foil set.]( "Accessories")
Warm-up time: 2 - 4 minutes, speed: 400 mm per minute, film thickness: 75/80 - 125 micron
Still looking for suitable laminating foils?
Everyday laminating pouches, starter set, 80 mic.
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![DIN A4, DIN A5, DIN A6, business cards.]( "Format")
![25 films of each size in a folding carton with a total of 100 foils.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: starter set, film thickness: 80 micron, quantity: 100 pieces
Everyday laminating pouches, A3, 80 mic.
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For DIN A3 documents with the dimensions 303 mm x 426 mm.]( "Format")
![Package unit of 25 foils per pack.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: DIN A3, film thickness: 80 micron, quantity: 25 pieces
Everyday laminating pouches, A4, 80 mic. small pack
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For DIN A4 documents with the dimensions 216 mm x 303 mm.]( "Format")
![Package unit of 25 foils per pack.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: DIN A4, film thickness: 80 micron, quantity: 25 pieces
Everyday laminating pouches, A4, 80 mic. big pack
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For DIN A4 documents with the dimensions 216 mm x 303 mm.]( "Format")
![Package unit of 100 foils in a folding box.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: DIN A4, film thickness: 80 micron, quantity: 100 pieces
Everyday laminating pouches, A5, 80 mic.
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For DIN A5 documents with the dimensions 154 mm x 216 mm.]( "Format")
![Package unit of 25 foils per pack.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: DIN A5, film thickness: 80 micron, quantity: 25 pieces
Everyday laminating pouches, A6, 80 mic.
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For DIN A6 documents with the dimensions 110 mm x 160 mm.]( "Format")
![Package unit of 25 foils.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: DIN A6, film thickness: 80 micron, quantity: 25 pieces
Everyday laminating pouches, business cards, 80 mic.
![Laminating films with a thickness of 80 microns.]( "Film thickness")
![For business cards with the dimensions 60 mm x 95 mm.]( "Format")
![Package unit of 100 foils in a folding carton.]( "Content")
![Glossy and transparent and suitable for hot lamination.]( "Features")
Format: business cards, film thickness: 80 micron, quantity: 100 pieces
Premium laminating pouches, A4, 125 mic. pre punched
![Laminating films with a thickness of 125 microns.]( "Film thickness")
![For DIN A4 documents with the dimensions 228 mm x 303 mm.]( "Format")
![Package unit of 25 foils per pack.]( "Content")
![Glossy and transparent for hot lamination with ring binder perforation.]( "Features")
Format: DIN A4 pre punched, film thickness: 125 micron, quantity: 25 pieces